36
Step 8
1
Evenly spread out the wood chips across the glow bed. Ensure that the chips are mixed.
Ensure that particularly at the front of the stove there are chips with various dimensions lying together for the best
possible bottom covering. (g. 8-26).
1
After placing the wood set and projection plate, check the ame picture and adjust the placement of the logs where
necessary (g. 8-27). At completion of the installation, also ensure a proper distribution of the chips, glowing embers and
black and grey coals.
8-27
8-26
i n s ta l l a t i e h a n d l e i d i n gInstallation manual
To Next Page
Loading...
