49
Step 3
1
Place log D on the centre right rear and centre right front positioning cams (g. 8-56 and 8-57).
1
Place the right side of log F on the most right cam of the glow bed (g. 8-56). Allow the positioning cam of log F to rest on
the recess on the back of log D (g. 8-58).
1
Take log G and place it diagonally from the centre rear to the front right. Place log G over the positioning cam on the right
front on the glow bed. Here, the middle of log G rests on the recess in log D (fig. 8-56 and 8-58).
8-57
8-56
Installation manual
To Next Page
Loading...
