06
118
Driving
Speed limiter
Refer to the General recommendations on
the use of driving and manoeuvring aids.
This system prevents the vehicle
from exceeding the speed
programmed by the driver (speed
setting).
The speed limiter is switched on manually.
The minimum speed setting is 19
mph
(30
km/h).
The speed setting remains in the system
memory when the ignition is switched off.
Steering mounted control
For more information on Memorising speeds
or on the Speed Limit recognition and
recommendation, refer to the corresponding
sections.
Displays in the instrument
panel
Switching on/pausing
F Turn thumbwheel 1 to the "LIMIT" position
to select the speed limiter; the function is
paused.
F If the speed setting is suitable (last speed
setting programmed in the system), press
button 4 to switch the speed limiter on.
F Pressing button 4 again temporarily
interrupts the function (pause).
When the speed setting remains below
the vehicle's speed for a prolonged period
of time, an audible warning will sound.
Adjusting the limit speed
setting
You do not have to switch the speed limiter on
in order to set the speed.
To modify the limit speed setting using the
current speed of the vehicle:
F in steps of + or – 1 mph (km/h), make
repeated short presses on button 2 or 3,
F continuously, in steps of + or – 5 mph
(km/h), press and hold button 2 or 3.
1. ON (LIMIT position)/OFF.
2. Reduce the speed setting.
3. Increase the speed setting.
4. Pause/resume speed limiter with the
speed setting previously stored.
5. Depending on version:
Display of speed thresholds recorded
using Memorising speeds.
or
Use the speed suggested by the Speed
Limit recognition and recommendation
(MEM display).
6. Speed limiter on/off indication.
7. Speed limiter mode selection indication.
8. Programmed speed value.
9. Speed suggested by the Speed Limit
recognition and recommendation system
(depending on version).
To Next Page
Loading...
Need help?
General
