06
122
Driving
Switching off
F Turn the thumbwheel 1 to the "OFF"
position: the cruise control information
disappears from the screen.
Malfunction
Memorising speeds
Linked to the speed limiter and programmable
cruise control, this function allows speed limits
to be registered which will then be suggested
as settings for these two systems.
You can memorise several speed settings for
each for system.
By default, some speed settings are already
memorised.
As a
safety measure, the driver must
only modify the speed settings when
stationary.
Modifying a speed setting
From the Driving/Vehicle menu of
the touch screen, select "Driving
functions", then "Memorised
speed settings".
"MEM" button
For more information on the Speed limiter
or Cruise control, refer to the corresponding
section.
The display of dashes (flashing then fixed)
indicates a
fault with the cruise control system.
Have it checked by a
dealer or a qualified
workshop.
With this button, you can select a
memorised
speed setting to use with the speed limiter or
the programmable cruise control.
DS DRIVE ASSIST
Only available for the versions with automatic
gearbox.
This system automatically adjusts the speed
and corrects the trajectory of the vehicle as
a result of the Adaptive Cruise Control with
Stop & Go function working alongside the
Active Lane Keeping Assist.
These two functions must be activated and in
operation.
This system is especially suitable for driving on
motorways and main roads.
For more information on Adaptive Cruise
Control and Active Lane Keeping Assist,
refer to the corresponding sections.
The system assists the driver in managing
the steering, acceleration and braking
within the limits of the laws of physics
and the capabilities of the vehicle. Some
road infrastructure elements or vehicles
present on the road may not be properly
seen or may be poorly interpreted by the
camera and radar, which may lead to an
unexpected change in direction, a lack of
steering correction and/or inappropriate
management of the acceleration or
braking.