DS Automobiles DS 3 CROSSBACK User Manual

06
121
Driving
For more information on Memorising speeds
or on the Speed Limit recognition and
recommendation, refer to the corresponding
sections.
Displays in the instrument
panel
Switching on/pausing
F Turn thumbwheel 1 to the "CRUISE"
position to select cruise control mode; the
function is paused.
F
To start the cruise control and set a cruise
speed, once the vehicle has reached the
desired speed, press button 2 or 3; the
current speed of your vehicle becomes the
cruise speed setting.
F
Pressing button 4 temporarily interrupts the
function (pause).
F Pressing button 4 again restores operation
of the cruise control (ON).
The operation of the cruise control can
also be temporarily interrupted (pause):
-
by pressing the brake pedal,
-
automatically, if the electronic stability
control (ESC) system is triggered.
Modifying the cruise speed
setting
The cruise control must be active.
To modify the cruise speed setting from the
current speed of the vehicle:
F In steps of +/- 1 mph (km/h), make
successive short presses on button 2
or 3.
F
Continuously, in steps of +/- 5
mph (km/h),
press and hold button 2
or 3.
Pressing and holding button 2 or 3 results
in a rapid change in the speed of your
vehicle.
6. Cruise control pause/resume indication.
7. Cruise control mode selection indication.
8. Value of the speed setting.
9. Speed suggested by the Speed Limit
recognition and recommendation system
(depending on version).
Release the accelerator pedal.
As a precaution, it is recommended
that the cruise speed chosen be close
to the current speed of your vehicle, so
as to avoid any sudden acceleration or
deceleration of the vehicle.
To modify the cruise speed setting using
memorised speed settings and from the touch
screen:
F Press button 5 to display the memorised
speed settings.
F Press the button for the desired speed
setting.
The selection screen closes after a few
moments.
This setting becomes the new cruise speed.
To modify the cruise speed setting using
the speed suggested by the Speed Limit
recognition and recommendation:
F The suggested speed is displayed in the
instrument panel.
F Make an initial press on button 5; a
message is displayed to confirm the
memorisation request.
F Press button 5 again to save the suggested
speed.
The speed displays immediately in the
instrument panel as the new speed setting.

DS Automobiles DS 3 CROSSBACK Specifications

General

Brand	DS Automobiles
Model	DS 3 CROSSBACK
Category	Automobile
Language	English