06
123
Driving
Adaptive Cruise Control
Refer to the General recommendations
on the use of driving and manoeuvring
aids and to Cruise control – particular
recommendations.
This system automatically maintains the
speed of your vehicle at a value which you set
(speed setting), while keeping a
safe distance
from the vehicle in front (target vehicle), and
which has been set beforehand by the driver.
The system automatically manages the
acceleration and deceleration of the vehicle.
With the Stop & Go function, the system
manages the braking until the vehicle stops
completely, and also manages its restarting.
Primarily designed for driving on main
roads and motorways, this system only
works with moving vehicles driving in the
same direction as your vehicle.
If the driver operates a
direction indicator
to overtake a
slower vehicle, the cruise
control allows your vehicle to temporarily
approach the vehicle in front to assist
the overtaking manoeuvre, without ever
exceeding the speed setting.
Some vehicles present on the road may
not be properly seen or may be poorly
interpreted by the camera and/or radar
(e.g. a lorry), which may lead to a poor
assessment of the distances and lead to
the vehicle inappropriately accelerating or
braking.
Steering mounted control
To do so, it has a camera located at the top of
the windscreen and a
radar located in the front
bumper.
3 Activation of cruise control at the current
speed/increase speed setting.
4 Pausing/resumption of cruise control with
the speed setting previously stored.
Confirmation of the restart of the vehicle
after automatic stop (versions with Stop &
Go function).
5 Use the speed suggested by the Speed
Limit recognition and recommendation
(MEM displayed).
6 Display and adjustment of the distance
setting to the vehicle in front.
Use
Activating the system (paused)
F With the engine running, turn the
thumbwheel 1
downwards to the CRUISE
position. Cruise control is ready to operate
(grey display).
1 ON (CRUISE position)/OFF.
2 Activation of cruise control at the current
speed/decrease speed setting.
Starting cruise control and selecting
a speed
With a manual gearbox, your speed must be
between 19
and 112 mph (30 and 180 km/h).
With an automatic EAT8 gearbox, your speed
must be between 0 and 112 mph (0 and
180 km/h).
F Press button 2 or 3: the current speed
becomes the speed setting (minimum
19 mph (30 km/h)) and cruise control is
immediately in operation (green display).
To Next Page
Loading...
Need help?
General
