DS Automobiles DS 3 CROSSBACK User Manual

29
01
Instruments
With DS CONNECT NAV
F Press this button to select the
Settings menu.
F
Select "OPTIONS".
F Select "Screen configuration".
F Select the "Brightness" tab.
F Adjust the brightness by pressing
the arrows or moving the slider.
F Press this button to save and
exit.
You can also switch off the screen:
The screen goes off completely.
F
Press the screen again (anywhere on its
surface) to activate it.
Trip computer
Information displayed about the current journey
(range, fuel consumption, average speed, etc.).
Display of data in the
instrument panel
F Press this button to select the
Settings menu.
F
Select "Switch off screen".
F Press this button located on the end of the
wiper control stalk to display the different
tabs in turn.
- The current information tab with:
•
the range,
•
the current fuel consumption,
•
the Stop & Start time counter.
- Trips "1" and "2" with:
•
the average speed,
•
the average fuel consumption,
•
the distance travelled.
Trip reset
F When the desired trip is
displayed, press the button on
the end of the wiper control stalk
for more than 2
seconds.
Trips "1" and "2" are independent and are used
identically.
A few definitions…
Range
(miles or km)
The distance which can still be
travelled with the fuel remaining in
the tank (depending on the average
fuel consumption over the last few
miles (kilometres) travelled).
When the range falls below 19
miles (30 km),
dashes are displayed.
After filling with at least 5 litres of fuel, the
range is recalculated and is displayed if it
exceeds 62 miles (100 km).
If dashes instead of figures continue to be
displayed when driving, contact a dealer or
a qualified workshop.
This value may vary following a
change in
the style of driving or the terrain, resulting
in a significant change in the current fuel
consumption.

DS Automobiles DS 3 CROSSBACK Specifications

General

Brand	DS Automobiles
Model	DS 3 CROSSBACK
Category	Automobile
Language	English