06
125
Driving
Displays in the instrument panel
Messages and alerts
7. Vehicle detected by the system (symbol
full).
8. Cruise control active (colour not grey).
9. Value of the speed setting.
10. Speed suggested by the Speed Limit
recognition and recommendation.
11. Vehicle held stopped (versions with
automatic gearbox).
12. Inter-vehicle distance setting.
13. Position of the vehicle detected by the
system.
To benefit from the following information in
the instrument panel, select the DRIVING or
Driving aids display mode.
The display of these messages or alerts is
not sequential.
"Activation not possible, conditions
unsuitable" The system refuses to
activate the cruise control (speed
outside the operating range, winding
road).
Stop & Go function
"Cruise control paused" or "Cruise
control suspended" following a
brief
acceleration by the driver.
"Cruise control active", no vehicle
detected.
"Cruise control paused", vehicle
detected.
"Cruise control active", vehicle
detected.
"Take back control" (orange)
"Take back control" (red)
F
Brake or accelerate, depending on the
context.
F
Take back immediate control of the
vehicle: the system cannot manage the
current driving situation.
"To restart, press on the accelerator
or press button II"
(button 4).
The system has brought the vehicle to
a complete stop.
Within 3
seconds, the vehicle starts off again
automatically and gradually.
After 3
seconds, the driver must accelerate or
press button 4 to move off again.
To Next Page
Loading...
Need help?
General
