DS Automobiles DS 3 CROSSBACK User Manual

06
149
Driving
It is possible to change the type of manoeuvre
at any time, including during the available
space search phase.
F
Drive at a distance of 0.50 to 1.50 m from
the row of parked vehicles, not exceeding
19 mph (30 km/h), until the system finds an
available space (indicated by OK on the
display and an audible signal).
For "parallel" parking, the length of the
space must be at least equal to that of
your vehicle plus 1 m.
For "bay" parking, the width of the space
must be at least equal to that of your
vehicle plus 0.70 m.
Preparing for the manoeuvre
F Move very slowly until the request to
stop the vehicle and the "STOP" sign are
displayed, accompanied by an audible
signal.
Once the vehicle has stopped, an instructions
page is displayed on the screen.
F
To prepare for the manoeuvre, you must
fulfil all of these instructions.
This symbol will be automatically
displayed when the instruction has
been applied.
Once all the instructions have been validated, a
new screen is displayed, indicating that you can
undertake the manoeuvre.
F
To undertake the manoeuvre,
press this button.
F While holding the button down, gradually
release the brake pedal.
The button must be held down
throughout the manoeuvre.
Carrying out the manoeuvre
As soon as the driver releases the brake
pedal, the system automatically takes control
of choosing the travel direction, forwards or
reverse, acceleration, braking and the steering
direction.
The manoeuvring status is indicated by these
symbols:
Manoeuvre in progress.
Manoeuvre interrupted.
Manoeuvre completed or
abandoned (white arrows indicate
that the driver must take back
control of their vehicle).
The direction of the manoeuvre is indicated by
these symbols:
The central arrow is green whilst the vehicle
is moving, or white to indicate the next
manoeuvring direction.
The start of the manoeuvre is indicated by
the display of a screen with the message
"Manoeuvre under way", accompanied by an
audible signal.
The Reversing camera and the parking sensors
are automatically activated to help you monitor
the close surrounding area of your vehicle
throughout the manoeuvre.
Forwards.
Reverse.
Throughout the whole manoeuvre,
indicated by the
green "AUTO" symbol,
the driver must hold the selector button
down.

DS Automobiles DS 3 CROSSBACK Specifications

General

Brand	DS Automobiles
Model	DS 3 CROSSBACK
Category	Automobile
Language	English