03
47
Ease of use and comfort
Cushion height and angle
F Tilt the rear of the control upwards or
downwards to obtain the required height
and angle.
Front head restraints
Height adjustment
F Upwards: pull the head restraint up to the
desired position; the head restraint can be
felt to click into position.
F Downwards: press lug A to lower the head
restraint.
The adjustment is correct when the upper
edge of the head restraint is level with the
top of the head.
Removing a head restraint
F Tilt the backrest to the rear to make it easier
to remove the head restraint.
F Pull the head restraint fully up.
F
Press the lug A to release the head restraint
and remove it completely.
F Stow the head restraint securely.
Rettingaheadrestraint
F Insert the head restraint rods into the guides
in the corresponding seat backrest.
F Push the head restraint down as far as it
will go.
F Press the lug A to release the head restraint
and push it fully down.
F Adjust the height of the head restraint.
Never drive with the head restraints
removed; they must be in place and
adjusted for the occupant of the seat.
Additional adjustments
Electric lumbar adjustment
F Press the + or – control to obtain the
desired lumbar support.
Massage function
(Driver's seat only)
This function provides lumbar massage; it only
operates when the engine is running as well as
in STOP mode of the Stop & Start system.
To Next Page
Loading...
