DSC PowerSeries PC1616 Installation Guide

PowerSeries - PC1616/PC1832/PC1864
52
Module Programming
[801] PC5400 Printer Module Programming
Refer to the PC5400 Installation Manual for installation and programming instructions.
[802] PC59xx VOX Module Programming
Refer to the PC59xx Installation Manual for installation and programming instructions.
[804] Wireless Expansion Programming
Refer to the RF5132/RFK55xx Installation Manual for programming locations and instructions.
[805] PC5100 Programming
Refer to the PC5100 Installation Manual for programming locations and instructions.
[851] TL/GS Module Programming
Refer to the TL/GS Installation Manual for programming locations and instructions.
Special Installer Functions
[898] Wireless Enrollment
[899] Template Programming
[900] Panel Version Displayed
[901] Installer Walk Test Mode Enable/Disable
[902] Module Supervision Reset
[903] Module Supervision Field
[904] Wireless Module Placement Test
[905] - [909] For Future Use
[989] Default Master Code
[990][Installer Code][990] Installer Lockout Enable
[991][Installer Code][991] Installer Lockout Disable
[992] For Future Use
[993][Installer Code][993] Restore Alternate Communicator to Default Programming
[994] For Future Use
[995][Installer Code][995] Restore Escort5580 to Default Programming
[996][Installer Code][996] Restore RF5132 to Default Programming
[997][Installer Code][997] Restore PC5400 to Default Programming
[998][Installer Code][998] Restore PC59xx to Default Programming
[999][Installer Code][999] Restore Control Panel to Default Programming

DSC PowerSeries PC1616 Specifications

General

Partitions	2
Keypads	Up to 8
Zones	6 on-board
PGMs	2
Power Supply	16.5VAC
Battery Backup	12VDC, 4Ah