6
1. Overview and Features
This chapter describes the overview of NETIMPRESS air series, composition of the programming environment,
and necessary operating procedures for starting the programming.
1.1. Overview of NETIMPRESS air series
NETIMPRESS air is a compact CAN Flash Programmer & Logger tool that you can use for ECU development,
evaluation, and field services. Since NETIMPRESS air is equipped with USB, you can run and control it via
USB of PC. Moreover WLAN model (/W model) is equipped with Wireless LAN, therefore you can operate it in
wireless environment.
NETIMPRESS air can operate by an electrical power (12V) provided by in-car battery. Therefore you can do a
programming and logging by using NETIMPRESS air as a stand-alone operation (without PC).
By adding a firmware (definition file) for programming each microcomputer into the SD card for NETIMPRESS
air main unit, it can support various devices.
It can also save the logging data in the SD card by adding a license for logging.
If you install AZ990 (Programming software) and AZ992 (Logging software) on PC, you can set
programming/logging conditions via USB or WLAN.
Setting conditions are stored in the SD card. Therefore you can use it as a stand-alone (without PC).
ECU
NETIMPRESS air
NETIMPRESS air Connect
To Next Page
Loading...