7
Make sure to use SD card provided by YDC. If you use other SD cards, it may result in failure.
(Commercial-release SD card is not available)
1.2. Communication environments
USB can be used for communication between a host PC and NETIMPRESS air. For /W model, wireless LAN is
also available.
Specific driver is necessary for USB.
For wireless LAN, an access point or a host PC connectable by wireless LAN is necessary.
SD card for
NETIMPRESS air
SD card which contains programming firmware data for microcomputer.
Programming for each device can be supported by inserting the SD card
into NETIMPRESS air.
You can add the programming target devices by adding a license.
SD card is empty with factory setting.
Please make sure to add a license before operation.
➥
For how to add a definition license, see Chapter 4.1 “
dding the
definition license”.
For MCU which is same series as the MCU supported by one license, it can
be supported by adding a MICOM-pack provided by YDC.
➥
For details of Micom-Pack, see Chapter 4.3 “Downloading the each
setting file”.
To Next Page
Loading...