Need help?Do you have a question about the Dual HS130 and is the answer not in the manual?
Identifies and describes all controls and connectors on the unit.
Instructions for removing packaging, securing the chassis for transport, and preparing for use.
Guide for connecting speakers to the unit's terminals and impedance considerations.
Recommendations for optimal speaker positioning relative to the listener.
Steps for connecting the unit to AC power and adjusting voltage settings.
Guide to operating the unit as a turntable for playing single records.
How to initiate automatic playback for standard record sizes.
Procedure for manually placing the tonearm and starting playback.
Instructions to restart playback of the current record.
How to pause and resume playback, including repeating sections.
Procedure for stopping playback and returning the tonearm to its rest.
Using the automatic changer spindle for multi-record playback.
Setting up for endless, repeated playback of a single record.
Adjusting the overall sound level with tone compensation features.
Fine-tuning bass and treble frequencies for desired sound emphasis.
Adjusting sound output between left and right channels for room acoustics.
Selecting between stereo and monaural playback modes for different audio sources.
Choosing between Stereo, Quadro I, Quadro II, and 2x Stereo playback options.
Adjusting the balance control to center the stereo sound image.
Guide to achieving quadraphonic sound with proper speaker configuration.
Procedure to achieve a neutral, balanced tonearm position.
Adjusting the vertical tracking force for optimal record and stylus care.
Compensating for lateral skating force to ensure accurate tracking.
Using the cue lever for precise, gentle tonearm placement and lifting.
Adjusting playback speed and pitch using the pitch control knob.
Calibrating the pitch control for accurate speed using a stroboscope.
Fine-tuning the tonearm's auto-drop point for correct record entry.
Procedure to adapt the unit for 50 Hz or 60 Hz mains power.
Instructions for safely removing the turntable platter for maintenance access.
Connecting an external tuner to the unit's dedicated TUNER input.
Connecting tape recorders (mono/stereo) to the unit's TAPE input.
Guide to connecting headphones, including automatic speaker muting.
Information on unit lubrication, authorized service, and proper packaging.
Identifies and describes all controls and connectors on the unit.
Instructions for removing packaging, securing the chassis for transport, and preparing for use.
Guide for connecting speakers to the unit's terminals and impedance considerations.
Recommendations for optimal speaker positioning relative to the listener.
Steps for connecting the unit to AC power and adjusting voltage settings.
Guide to operating the unit as a turntable for playing single records.
How to initiate automatic playback for standard record sizes.
Procedure for manually placing the tonearm and starting playback.
Instructions to restart playback of the current record.
How to pause and resume playback, including repeating sections.
Procedure for stopping playback and returning the tonearm to its rest.
Using the automatic changer spindle for multi-record playback.
Setting up for endless, repeated playback of a single record.
Adjusting the overall sound level with tone compensation features.
Fine-tuning bass and treble frequencies for desired sound emphasis.
Adjusting sound output between left and right channels for room acoustics.
Selecting between stereo and monaural playback modes for different audio sources.
Choosing between Stereo, Quadro I, Quadro II, and 2x Stereo playback options.
Adjusting the balance control to center the stereo sound image.
Guide to achieving quadraphonic sound with proper speaker configuration.
Procedure to achieve a neutral, balanced tonearm position.
Adjusting the vertical tracking force for optimal record and stylus care.
Compensating for lateral skating force to ensure accurate tracking.
Using the cue lever for precise, gentle tonearm placement and lifting.
Adjusting playback speed and pitch using the pitch control knob.
Calibrating the pitch control for accurate speed using a stroboscope.
Fine-tuning the tonearm's auto-drop point for correct record entry.
Procedure to adapt the unit for 50 Hz or 60 Hz mains power.
Instructions for safely removing the turntable platter for maintenance access.
Connecting an external tuner to the unit's dedicated TUNER input.
Connecting tape recorders (mono/stereo) to the unit's TAPE input.
Guide to connecting headphones, including automatic speaker muting.
Information on unit lubrication, authorized service, and proper packaging.
To Next Page
General
