Press buttons (1) and (2) to highlight the customisable
parameters one by one: in particular, use button (1) to
highlight the following item and button (2) to highlight
the previous item.
After highlighting the required parameter, press
button (4) to open the corresponding menu page.
Any parameter change made is saved and remains in
the memory also after a battery-off.
The riding parameters set by Ducati can be restored
for each single riding mode through the DEFAULT
Function.
If you highlight "EXIT" and press button (4) you quit the
sub-menu and go back to previous page.
Warning
Changes should only be made to the
parameters by people who are experts in motorcycle
set-up; if the parameters are changed accidentally,
use the "DEFAULT" function to restore factory
settings.
ABS
DTC
ENGINE
DEFAULT
SPORT
EXIT
1
2
4
Fig. 59
110
To Next Page
Loading...
