Average fuel consumption
The instrument panel calculates and displays the
motorcycle average fuel consumption, the set unit of
measurement and CONS. AVG.
The calculation is made considering the quantity of
fuel used and the distance travelled since TRIP1 was
last reset.
When TRIP1 is reset, the value is reset and the first
value available is displayed 10 seconds after the reset.
During the first 10 seconds, when the value is not yet
available, the display will show a string of three
dashes "- - . - " steadily as average fuel consumption.
Value is expressed in the set unit of measurement
(litres / 100 km or mpg UK or mpg USA).
The active calculation phase occurs when the engine
is running and the motorcycle is stopped: (moments
when the motorcycle is not moving and the engine is
OFF are not considered).
Note
It is possible to change the units of
measurement of Speed (and distance travelled as
well) from km/h (and km) to mph (and mi) through the
SETTING MENU, using the UNITS SETTING function.
299
N
LAP
URBAN
98
6
5
4
3
2
1
7
10
11
km/h
RPM x 1000
DTC 1
ABS 1
CONS. AVG
L/100 Km
25.0
TRACK
Fig. 32
78
To Next Page
Loading...
