Average speed
The instrument panel calculates and displays the
motorcycle average speed, the set unit of
measurement and SPEED AVG text.
The calculation considers the distance and time since
TRIP1 was last reset.
When TRIP1 is reset, the value is reset and the first
value available is displayed 10 seconds after the reset.
During the first 10 seconds, when the value is not yet
available, the display will show a string of three
dashes " - - - " steadily as average speed.
The active calculation phase occurs when the engine
is running even if the motorcycle is stopped
(moments when the motorcycle is not moving and
the engine is OFF are not considered).
The average speed value displayed is calculated by
adding 5% so as to be consistent with motorcycle
speed indication.
Note
It is possible to change the units of
measurement of Speed (and distance travelled as
well) from km/h (and km) to mph (and mi) through the
SETTING MENU, using the UNITS SETTING function.
TRACK
299
N
LAP
URBAN
98
6
5
4
3
2
1
7
10
11
km/h
RPM x 1000
DTC 1
ABS 1
SPEED AVG
Km/h
299
Fig. 33
79
To Next Page
Loading...
