When entering the function, the currently set ABS
level or status is indicated on the left (e.g.: ABS 1).
Customisation options are indicated in the middle:
levels 1 to 3.
Press buttons (1) and (2) to highlight the levels one by
one: in particular, use button (1) to highlight the
following item and button (2) to highlight the previous
item.
Once the desired level is highlighted, press
CONFIRM MENU button (4) to highlight MEMORY.
To save the new setting, hold button (4) for two
seconds while the message MEMORY is highlighted
in orange. If storage is successful, MEMORIZED will
be highlighted in green for one second, level number
or status will be refreshed (update is indicated in
green) and then EXIT will be highlighted in green.
To exit the menu and go back to previous page, select
EXIT and press button (4).
112
To Next Page
Loading...
