When entering the function, the currently set DTC
level or status is indicated on the left (e.g.: DTC 3).
Customisation options are indicated in the middle:
levels 1 to 8 and status OFF.
Select the parameter to be customised (DTC), by
pressing button (1) or (2).
Once the desired parameter is highlighted, press
CONFIRM MENU button (4).
To save the new setting, hold button (4) for two
seconds while the message MEMORY is highlighted
in orange.
If storage is successful, MEMORIZED will be
highlighted in green for one second, level number or
status will be refreshed (update is indicated in green)
and then EXIT will be highlighted in green.
To exit the menu and go back to previous page, select
EXIT and press button (4).
115
To Next Page
Loading...
