When entering the function, currently set engine
power is indicated on the left (e.g.: ENGINE HIGH).
Customisation options are listed in the middle:
- HIGH.
- MEDIUM
- LOW.
Press buttons (1) and (2) to highlight the available
power options one by one: in particular, use button (1)
to highlight the following item and button (2) to
highlight the previous item.
Once the desired power level is highlighted, press
CONFIRM MENU button (4) to highlight MEMORY.
To save the new setting, hold button (4) for two
seconds while the message MEMORY is highlighted
in orange.
If storage is successful, MEMORIZED will be
highlighted in green for one second, power level will
be refreshed (update is indicated in green) and then
EXIT will be highlighted in green.
To exit the menu and go back to previous page, select
EXIT and press button (4).
118
To Next Page
Loading...
