Entering the old Pin Code:
When accessing this function, "OLD:" indication will
be displayed followed by four flashing dashes "- - - -”
(A).
To go back to the previous indication without editing
the PIN CODE, keep (2) pressed for 2
seconds.
Entering the old code (B):
1) Press (4), one digit flashing
indicating "0";
2) Each time you press the (1) the displayed
number increases by one (+ 1) up to "9" and then
back from "0";
3) Each time you press the (2) the displayed
number decreases by one (- 1) up to "1" and then
back from "0";
4) Press (4) to confirm the number and
move on to the following digit.
Repeat the operations until you confirm all the 4
digits of the PIN CODE (C).
When you press (4) to confirm the and
last digit (C, Fig 134), the instrument panel responds
as follows:
Fig 134
184
To Next Page
Loading...
Need help?
General
