When entering the function, the instrument panel
displays the number of associated devices (if any) in
place of the time indication, displaying a 1-digit
figure.
This figure is the number of devices already paired
(max. 5). If at least 5 devices have already been
paired, the message: “PAIRING” and its frame will
not be displayed.
If at least one device is already paired, the name of
the first paired device or the message “NO DEVICE”
will be displayed.
Use (1) and (2) to select PAIRING (flashing
frame) and then the name of the first device paired
(if at least one device has already been paired).
Now, if you press (4):
●
when PAIRING is selected (flashing frame), you
run a pairing of one or several Bluetooth devices;
●
when the name of the first device is flashing, you
can delete any paired devices;
To quit the function press (2) for 2 seconds.
Fig 2
20
To Next Page
Loading...
Need help?
General
