Pairing of a new device
This function allows user to associate (pair) one or
several Bluetooth devices by running the "PAIRING"
control.
Set the Bluetooth device to ensure it can be
detected by the control unit, so turn device on and
make it visible to other devices.
A Bluetooth device in visible mode transmits a
wireless signal allowing it to be detected by other
devices. This function is called pairing mode.
The motorcycle is equipped with a Bluetooth control
unit that works as a hub between the various
electronic devices relying on a Bluetooth
communication
Note
Maximum of 2 1 rider earphone, 1
passenger earphone, 1 satellite navigator can be
paired up.
and Bluetooth Headset device
manufacturers may incorporate changes
within the standard protocols over the course of the
lifecycle of the device and
Earphones).
These changes are outside the control of
Ducati and may result in Bluetooth Headset devices
functionality becoming impaired (sharing Music,
multimedia player, etc.) and may equally some
types of (depending on
Bluetooth profiles). This is why Ducati cannot
guarantee multimedia player proper operation for:
●
the entire range of headphones and
available on the market;
●
that do not the required
Bluetooth profiles.
Check that your the following
profiles:
●
MAP profile: for a correct display of SMS and
MMS notifications;
●
PBAP profile: for a correct display of the
contact list.
21
To Next Page
Loading...
Need help?
General
