DUNE HD Base 3.0 - Important Safety Instructions

Dune HD Base 3.0 user manual
6
To avoid troubles, please read this manual carefully before using the device.
Keep the manual for future reference.
Read these operating instructions carefully before using the unit. Follow all the safety instruc-
tions listed below. Keep these operating instructions handy for future reference.
1) Read these Instructions - All the safety and operating instructions should be read before the
product is operated.
2) Keep these Instructions - The safety and operating instructions should be retained for future
reference.
3) Heed all Warnings - All warnings on the product and in the operating instructions should be
adhered to.
4) Follow all Instructions - All operating and use instructions should be followed.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer's instru
tions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other ap-
paratus (including amplifi ers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A grounding type plug has two blades and
a third grounding prong. The wide blade or the third prong are provided for your safety. If
the provided plug does not fi t into your outlet, consult an electrician for replacement of the
obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11) Only use attachments/accessories specifi ed by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specifi ed by the manufacturer, or
sold with the apparatus. When the cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storm or when unused for long periods of time.
14) Refer all servicing to qualifi ed service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has
been spilled or objects have falling into the apparatus, the apparatus has been exposed to
rain or moisture, doesnot operate normally, or has been dropped.
Important Safety Instructions
10cm
10cm
10cm
If you install your device in a closed space, it is necessary to provide enough
clearance around it for proper cooling. The clearance at each side should be
not less than 10 cm.
HD BASE 3.0