EasyManua.ls Logo

DUNE HD Base 3.0 - Blu-ray Playback

DUNE HD Base 3.0
47 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Dune HD Base 3.0 user manual
30
Blu-ray Playback
Note: to play optical discs, an appropriate external optical disc drive should be connected to
the player.
Note: playback of AACS-encrypted retail Blu-ray discs is not supported, only non-protected
Blu-ray discs are supported, such as AVCHD discs or BDAV discs.
When you play a Blu-ray disc, the player uses so called "Blu-ray playback mode".
Note: when playing a Blu-ray disc, a so-called System Storage flash drive should be
available. Some player models / revisions may have such flash drive built-in, so there is
no need to attach an external flash drive for this purpose. You may check Setup / System
Information / System Storage to see whether the System Storage flash drive is recognized
properly. For more information on the System Storage, please see http://dune-hd.com/
support/usb_flash_drive/.
To play a Blu-ray disc, navigate to the Main screen of the file browser, and insert the disc
into a Blu-ray drive. The player will recognize the inserted Blu-ray disc and enable the
corresponding optical drive item on the Main screen. Select this optical drive item and press
ENTER or PLAY. The player will start loading the Blu-ray disc.
Depending on a particular Blu-ray disc, its loading may take some time (up to several
minutes). While a Blu-ray disc is being loaded, you may see a blank screen or "loading..." or a
similar message on the screen. After the Blu-ray disc is loaded, the player will start playback
of the disc (e.g. will show the disc menu).
In the Blu-ray playback mode, the following RC buttons are available:
Left/Right/Up/Down/ENTER/RETURN: Navigate the disc menu.
POP UP MENU: Display an interactive menu of the disc (selection of scenes, switching
between titles, additional materials, etc).
TOP MENU: Switch to the top menu of the disc.
A (Red), B (Green), C (Yellow), D (Blue): Perform functions specific to a particular Blu-ray
disc.
STOP: Finish the playback, return to the Main screen of the file browser.
PAUSE: First press: switch to the pause mode.
Subsequent presses: frame-by-frame playback (switching to the next frame).
PLAY: Continue the playback.
SEARCH: Go directly to the desired time position.
PREV (|<<): Start playing back the current chapter from the beginning or switch to playback
of the previous chapter.
NEXT (|>>): Move to playback of the next chapter on the disc.
FWD (>>), REW (<<): Switch to accelerated forward/backward playback mode, switching
between acceleration modes: 1x, 2x, 4x, 16x.
PLAY: Return to the normal playback.
SLOW (|>): Switch to the slow-motion playback. Switching between modes: 1x, 1/2x, 1/4x,
1/8x.
PLAY: Return to the normal playback.
INFO: Show information on current status of the player:
Current operation: PLAY, PAUSE, etc.
Type of optical media used currently: BD-ROM, BD-R, etc.
Type of sound track: Stream type DD, DD+, DTS, etc.

Table of Contents

Other manuals for DUNE HD Base 3.0

Related product manuals