DUNE HD Base 3.0 - Advanced Playback Functions

29
● Up/Down: Select previous/next parameter.
● Left/Right: Decrease/increase the current parameter value.
● CLEAR: Reset to the default value.
● To exit the picture parameter setting mode, press ENTER (or wait
until automatic exit occurs after a short period of time).
MODE: Switch the deinterlacing mode used for playback of interlaced
content. Modes available: motion adaptive (default), bob, constant
blend, disabled.
A (Red): Switch to the sound synchronization adjustment mode, display
information on current setting.
● Left: decrease adjustment value ("move" the sound backwards in
time relatively to the video).
● Right: increase adjustment value ("move" the sound forward in time
relatively to video).
● To exit the adjustment mode, press ENTER or wait until automatic
exit occurs after a short period of time.
B (Green): First press: display information on the current status of
video frame rate adjustment.
● Subsequent presses: turn on/off video frame rate adjustment. In case
of activated adjustment, the video frame rate increases by a factor of
25/23.976.
PREV (|<<): Start playback of the current file from the beginning or
switch to the previous file from the playlist (if the current playback
position is close to the file beginning).
NEXT (>>|): Switch to the next file from the playlist.
MENU: Toggle showing of the browser of the current playlist.
● The browser displays the current playlist and the current item played.
● Up/Down/P+/P–: Navigate in the playlist.
● ENTER: Switch to the selected item in the playlist.
● REPEAT: Toggle the cyclic playback of the playlist.
● SHUFFLE: Toggle the random playback of the playlist.
Playback