DUNE HD Base 3.0 - File Playback Controls

Dune HD Base 3.0 user manual
28
with transition effects (see "Photo Viewer" section). When starting playback of a list of media
files consisting of both photos and other kinds of media files (video, audio), the player will ask
whether you want to show photos or play video and audio files.
In file playback mode, the following RC buttons are available:
STOP: Finish playback, return to the file browser.
PAUSE (||): First press: switch to the pause mode.
● Subsequent presses: frame-by-frame display (switch to the next frame).
● To exit the pause mode, press PLAY.
Left/Right/Up/Down/P+/P–: First press: switch to playback position changing mode.
Subsequent presses: change the playback position:
● Left/Right: Backward/forward by 10 sec.
● Up/Down: Backward/forward by 1 min.
● P+/P–: Backward/forward by 10 min.
● To exit the playback position changing mode, press the ENTER button (or wait until automatic
switching to the selected position occurs after a short period of time).
0, 1, 2, 3, 4, 5, 6, 7, 8, 9: Switch playback position to 0%, 10%, 20%, 30%, 40%, 50%, 60%,
70%, 80%, 90% (from the beginning of the file).
FWD (>>), REW (<<): Switch to the accelerated forward/backward playback, increase frame
rate (switch between acceleration modes 1x, 2x, 4x, 8x, 16x, 32x).
● To return to the normal playback, press PLAY.
SLOW (|>): Switch to the slow-motion forward playback, decrease frame rate (switch between
1x, 1/2x, 1/4x, 1/8x, 1/16x, 1/32x).
● To return to normal playback, press PLAY.
INFO: Show/hide information on the current file:
File name. Container type. Format (codec type). Resolution of the video stream in the file.
Maximum bitrate (statistics of the current session of file playback). Average bitrate (statistics of
the current session of file playback). Current bitrate (playback statistics). Duration.
AUDIO: First press: display information on the current sound track.
● Subsequent presses: switch to the next sound track.
SUBTITLE: First press: display information on the current subtitles.
● Subsequent presses: switch to the next subtitles.
● Up/Down: Move subtitles up/down.
ZOOM: First press: switch to picture zooming mode, display information on current zoom
setting.
● Subsequent presses: switch to subsequent picture zooming mode.
● In case the Special zooming mode is selected, the following RC buttons are enabled:
● Left/Right: Zoom in/out (proportional picture stretching).
● Up/Down: Increase/decrease vertical stretching (proportions adjusting).
● P+/P–: Increase/decrease the overscan area (useful to compensate for picture cropping by
a TV/projector).
● To exit the picture zooming mode, press ENTER or wait until automatic exit will be performed
after a short period of time.
SETUP: Display picture parameters setup menu (contrast, brightness, hue, saturation).