Need help?Do you have a question about the Duplo DBM-150 and is the answer not in the manual?
General| Model | DBM-150 |
|---|---|
| Type | Trimmer |
| Category | Trimmer |
| Power Source | Electric |
| Voltage | 100-240V |
| Frequency | 50/60Hz |
Details the primary functions and binding modes of the DBM-150 and DBM-150T.
Identifies DBM-150, DBM-150T, and belt stacker parts and their functions.
Explains control panel buttons, displays, and screen information.
Describes the Corner and Side Staple Kit and SXS Modification Kit.
Procedure for correctly powering the DBM-150 and connected units on and off.
Setting binding modes, paper sizes (standard and custom), and trimming options.
Adjusting stapler position, roller gap, paper guide roller, and step mode.
Checking booklet finish, aligning stapling/folding, and adjusting specific parts.
Steps to start binding operations and adjust the paper passage line.
Guides for installing the Corner and Side Staple Kit and SXS Modification Kit.
Instructions on how to feed paper into the machine manually.
Methods for cleaning conveyance belts, rollers, and sensors.
Procedure for replacing the stapler cartridge when it is depleted.
Lists and explains common error codes, causes, and solutions.
Detailed instructions for removing paper jams from DBM-150 and DBM-150T.
Common operational issues and solutions for both DBM-150 and DBM-150T.
Detailed technical specifications for the DBM-150 and DBM-150T models.
To Next Page
