Duplo DBM-150 User Manual

1-12
Chapter 1 Before Operation
4. Screen Descriptions
4-1. Top screen
The top screen is a screen displayed rst when you turn on the power.
Ready
210.0x297.0
0
01
A4
[4]
[5]
[7]
[6]
[1]
[2]
[3]
No. Information Displayed Details
[1] Memory No. Displays a memory No. currently selected.
[2] Paper size Displays a paper size of the memory currently selected. When stacked with
long edge feed*
1
, is displayed to the right of the paper size.
[3] Binding mode Displays a binding mode of the memory currently selected.
Saddle/Fold
Side
Corner F
Corner B
Fold
[4] Trimming mode Displays whether to perform trimming. When trimmed, is displayed and
when not trimmed, is displayed.
[5] Status Displays a current machine status. The messages displayed are as follows:
[Ready][Active][Starting][Stopping]
[6] Paper size (length x
width)*
2
Displays a paper size (length x width) of the memory currently selected.
[7] The number of sets
processed
Displays the number of sets processed by the machine. Pressing the key for
one second or more returns the count to "0." Once you turn o the power, the
count returns to "0."
*1:While feeding paper whose width is longer than its length is called “long edge feed,” feeding paper whose
length is longer than its width is called “short edge feed.”
*2: The denition of length x width is as follows.
Length
Paper feed
direction
Width
Memory No.
The memory number consists of 1 to 16. You can save information on a paper size, binding mode and ne
adjustment values on each memory No. Change the setting of each memory using the setting menu.
When the sheet feeder or the DFC-100 is connected to the DBM-150 as a upstream unit, you cannot use
the setting menu of the DBM-150. The paper size available on the upstream unit is automatically registered
on the DBM-150 memory and the memory No. whose paper size is the same as you have selected on the
upstream unit is automatically called.

Duplo DBM-150 Specifications

General

Brand	Duplo
Model	DBM-150
Category	Trimmer
Language	English