Duplo DBM-150 User Manual

2-19
Chapter 2 Basic Operation
7-3. Adjusting trimming misalignment
Do not sit on the stacker tray.
Do not push the stacker tray.
Do not put a heavy load on the stacker tray.
When trimming misalignment has occurred,
move the trimming stopper adjustment
according to the state of trimming
misalignment.
1
Loosen the trimming stopper
adjustment.
2
Move the adjustment checking the
label at the exit of the DBM-150T, which
shows the position of the stopper.
For A: Move the adjustment to the operator’s
side.
For B: Move the adjustment to the non-
operator’s side.
Paper feed direction
A
B
3
Tighten the trimming stopper
adjustment.

Duplo DBM-150 Specifications

General

Brand	Duplo
Model	DBM-150
Category	Trimmer
Language	English