1-10
Chapter 1 Before Operation
2-5. Accessories
[1] [2] [3]
[6][5][4]
No. Name QTY Use
[1] Manual feed guide F 1 Attach the guide to the operator's side of the manual feed inlet/paper
feed inlet with the magnet and move them according to a paper size.
(p.3-15)
[2] Manual feed guide B 1 Attach the guide to the non-operator's side of the manual feed inlet/
paper feed inlet with the magnet and move them according to a paper
size.
(p.3-15)
[3] Hexagonal wrench 1 Use to secure the position of the clinchers. Do not use this wrench for a
purpose other than handling the clincher xing screws as instructed in
this manual.
(p.2-5)
[4] Power cord for North
America
1 For 120 V
[5] Power cord for EU 1 For 220 to 240 V
[6] Instruction manual 1 This manual
To Next Page
Loading...
Need help?
General
