Duplo DC-6 Mini - Page 26

25
6. Using the DC-6 mini, DC-8 mini
4 Move the reference guide to the set
position “A3, LD”.
• Lift the upper and lower positions of the reference
guide manually and place it in the slot (A3, LD).
2 Loosen the fixing screw of the jogger
(right) and move it fully in the
direction of the arrow.
【Normal Mode】
1 Press the “Paper Receiving Selection
Key” and set the “Normal Mode”.
5 Press the “Paper Receiving Selection
Key” and set the “Sort Mode”.
For the procedures hereafter, refer to
“Procedures” on page 15.
StationaryPlate
Reference
Guide
Jogger(right)