Duplo DC-616 Instruction Manual

Driver Installation Procedures
19
Installing the PC Controller
2
REFERENCE
If the following warning message appears while
installation is in progress, simply click [Continue
Anyway] to proceed with the installation.
Click [Finish].
This completes the installation.
IMPORTANT
Connect the DC-616 and your computer with a USB cable, and then turn ON the DC-616.
USB cable (type AB): The cable length must be 3 m or shorter.
Click [No, not this time], and then click [Next].
Click [Install the software automatically
(Recommended)], and then click [Next].

Duplo DC-616 Specifications

General

Brand	Duplo
Model	DC-616
Category	Paper Cutters
Language	English