36
PC Controller Setting
PC Controller Setting
Limits of the Trail Cutting
A
B
Document feed direction
Create a JOB so that fi nished product of less than 67.0 mm is not set up within the trail edge
of 67.0 mm.
Because the product of less than 67.0 mm cannot be processed as fi nished product, it is
fi nely cut.
• Conditions of A
A ≥ 67.0 ..... Finished product
67.0 > A ≥ 49.0, and A+B=67.0 ..... Finished product
67.0 > A ≥ 49.0, and A+B < 67.0 .. Waste
A < 49.0 ..... Waste
• Conditions of B
B ≥ 67.0 ..... Finished product
B < 67.0 ..... Waste
To Next Page
Loading...
