Duplo DC-616 - Creating a JOB by Entering Values (DIRECT)

48
PC Controller Setting
PC Controller Setting
Click [BACK] to return to the main menu screen.
Creating a JOB by Entering Values ( DIRECT)
This section describes the procedures to create a JOB with DIRECT program.
Click [DIRECT].
Select a JOB creating mode.
Select the [Advanced Mode] check box to select
Advanced Mode.
Clear the check box to select Simple Mode.
The DIRECT screen appears.
The value limit appears in the lower right side of the
screen.
Refer to it when you create a JOB.
REFERENCE