Duplo DC-616 Service Manual (English)

Other manuals for Duplo DC-616

Questions and Answers:

J
Jerry AlvaradoJul 27, 2025
What to do if I get a Communication Error (001-***) on my Duplo Controller?
- M
  mkennedyJul 27, 2025
  If you encounter a Communication Error (001-***) with your Duplo Controller, it means the PC Controller isn't recognizing the DC-616. Here's what to check: 1. Ensure the USB cable is securely connected between your computer and the DC-616. 2. Verify that the DC-616 is powered ON. 3. For Windows users, confirm that [USB DC-616 Ver*.*] is registered as a USB controller in the [Device Manager] dialog. 4. Make sure the USB cable is 3 meters or shorter.
B
benjaminrobertsAug 1, 2025
What to do if I get Communication Errors (002, 003, 004) on my Duplo Controller?
- L
  Lisa MooneyAug 1, 2025
  If you receive Communication Errors (002, 003, 004) on your Duplo Controller, try the following: 1. Restart both the DC-616 and your computer. 2. Ensure that the USB cable being used is 3 meters or shorter.
O
okhanAug 6, 2025
What to do if the Duplo DC-616 Controller is in operation?
- A
  autumnmooreAug 7, 2025
  If the Duplo DC-616 is in operation, either wait for the current job to finish or press the STOP key on the DC-616 to stop the job. Ensure the DC-616 is in Operation Mode (regular state) by exiting any function settings, input, or job selection modes. Also, check the LCD panel for any error messages and clear them.
J
Jill SextonAug 11, 2025
What to do if the Duplo Controller says 'Input file name is not found'?
- S
  Stephen MorrisAug 11, 2025
  If you encounter the error 'Input file name is not found' on your Duplo Controller, re-enter the correct file name.
N
nathaniel95Aug 16, 2025
Why can't I input “Gutter Slits” on my Duplo Controller?
- M
  Mr. Kyle Harris IVAug 16, 2025
  When using the Duplo Controller, you cannot input “Gutter Slits” if the number of “Cards per Document” in the horizontal direction (Crosswise) is either 1 or exceeds the setting limit.
J
Julie HolmesAug 21, 2025
Why can't I input “Gutter Cuts” on my Duplo Controller?
- J
  Johnathan WestAug 22, 2025
  When using the Duplo Controller, you cannot input “Gutter Cuts” because the number of “Cards per Document” in the vertical direction (Lengthwise) is either 1 or more than the limit of the setting.