63
5
PC Controller Setting
Retrieving a JOB
Processing a JOB by Retrieving from DC-616 (SELECT)
This section describes the procedures to retrieve a saved JOB from the DC-616 and process the
JOB.
Click [SELECT].
After uploading the JOB data from the DC-616, JOB
numbers and JOB names are displayed.
Check the JOB No. box that you want to process, then
click [OK].
Clicking [BACK] returns to the main menu screen
without selecting a JOB.
● Editing the JOB data
1. The JOB details are displayed by clicking [Detail
Display].
2. The JOB details appear on the “WIZARD” screen.
To change the settings, click the text box and re-
enter the correction value.
Click [NEXT].
Clicking [FUNCTION] displays the contents of the
function settings of the JOB.
REFERENCE
If you created the JOB with the “DIRECT program”, the JOB data is displayed on the
“DIRECT” screen.
However, if you re-enter the data, which was created with the “WIZARD program”, on the
“DIRECT” screen, it is also displayed on the “DIRECT” screen.
To Next Page
Loading...
Need help?
General
