2
49
PC Controller Setting
PC Controller Setting
5
[Inch>> mm]
When you select the [Inch>>mm] check box, the
values entered in inches are converted to the values in
millimeters and displayed.
REFERENCE
The values entered before selecting the check box are
not converted.
Be sure to select the check box before entering values.
You can enter the values to three places of decimals in
inches.
Enter a JOB number in the [JOB No] box, and click
[NEXT].
REFERENCE
You can set up to 80 JOBs.
Paper size (Standard size)
Select a document size from the paper size box.
Enter a JOB name in the [JOB Name] box.
You can enter up to 13 characters.
Usable characters;
• Alphabets (A to Z, a to z)
• Numbers
• Symbols
REFERENCE
Width (Custom size)
When you want to use “Custom size” document, enter
the value of the document width in the [Width] box.
When you select “Standard size” in step 6, the selected
document width value appears here.
To Next Page
Loading...
Need help?
General
