3-1
Chapter 3 Advanced Operation
Chapter 3 Advanced Operation
1. Correcting Folding Misalignment
Folding misalignment consists of “folding misalignment along the sides of the paper” and “folding
misalignment along the vertical length of the paper”. Other than this, “deformed folding” may also occur due
to paper characteristics, etc.
Depending on the usage environment (temperature and humidity), paper type, thickness, paper grain
direction, trimming accuracy, and printing states folding misalignment may occur.
Do not put ngers inside during operation.
Keep away long hair, ties, jewelry and loose clothing.
It could cause injury.
1-1.
Adjustment the folding misalignment in the right and left direction
Ejection
direction
When the folded paper is misaligned along
the sides, correct using the skew correction
knob of the paper feed tray.
1
Check that the paper feed guides are
set correctly.
Gaps between the paper and paper feed
guides will cause folding misalignment along
the sides to occur easily.
To Next Page
Loading...
Need help?
General
