Duplo DF-980 User Manual

3-30
Chapter 3 Advanced Operation
8-6. Operation mode settings
The operation mode setting is used to set the folding stopper function of the folding plates 1 and 2 when the
power is turned on.
Default : [Normal]
The following modes can be set.
Normal mode
[Normal] : When the power is turned on, use the normal mode to start up in the normal setting state.
Refold mode (DF-980 only)
[Last Fold] : When the power is turned on, use the refold mode to start up the machine in the setting
details used previously. However, the machine will start up with [Manual Feed] and
[Interval Setting] set to OFF when the power is turned on.
Folding stopper xed mode
[Stopper Fixed] : Use [Stopper Fixed] to delete the setting operation on the control panel when
folding paper always in the same conditions. In this mode, when the power is turned
on, this machine is always set to the same conditions automatically, and initial
operation of the folding plates will not be performed. As the [Stopper Fixed] is
automatically set to the same conditions, the folding mode and paper size cannot be
changed.
However, the machine will start up with [Manual Feed] and [Interval Setting] set to
OFF when the power is turned on.
OtherSetting 1/4
Stack Roll Adj
Oper Mode
Test Feed Set
1
Press the menu key to display [Other
Setting].
OtherSetting 1/4
Stack Roll Adj
Oper Mode
Test Feed Set
2
Select [Oper Mode] with the or key.
Oper Mode
Normal
3
Press the key.
The [Oper Mode] screen is displayed, and at
this stage [Normal], [Last Fold], or [Stopper
Fixed] can be changed.
4
Select a mode with the or key.
Oper Mode
Last Fold
5
Press the key.
The selected details are set.
6
Press the key.
Returns to the [Other Setting].

Duplo DF-980 Specifications

General

Brand	Duplo
Model	DF-980
Category	Folding Machines
Language	English