6-1
Chapter 6 Trouble Guide
Chapter 6 Trouble Guide
1. Error Code
When an error occurs, error codes will be displayed on the LCD window as follows.
U***
Top Cover Open
Error Code
Error Message
Check the error code or the error message and solve the problem by following the list below.
If the error persists or occurs frequently, contact your dealer.
1-1. Warning error
Error
Code
Error Message Cause Solution
U010 Top Cover Open The top cover is open. Close the top cover.
U020 Side CoverL Open The side cover is open. Close the side cover.
U030 Fold Plate1 Err Folding plate 1 is not attached. Attach folding plate 1.
1-2. Motor error
Error
Code
Error Message Cause Solution
E010 Convey Motor Err Abnormal stack on the motor due to
paper jamming, etc.
Remove jammed paper and press the clear
key to release the error.
E020
E110 Tray Motor Err Abnormal stack on the motor for
raising and lowering paper feed
plates due to paper jamming, etc.
(DF-980)
E120
E210 Fold1 Motor Err Folding plate 1 is not attached
properly.
Motor for moving the folding stopper
is not functioning due to paper
jamming, etc.
Make sure that folding plate 1 is attached
properly.
Remove jammed paper and press the clear
key to release the error.
E220
E230
E310 Fold2 Motor Err Folding plate 2 is not attached
properly.
Motor for moving the folding stopper
is not functioning due to paper
jamming, etc.
Make sure that folding plate 2 is attached
properly.
Remove jammed paper and press the clear
key to release the error.
E320
E330
E810 S-Motor Err Abnormal stack on the stacker roller
motor due to paper jamming, etc.
Remove jammed paper and press the clear
key to release the error.
E820
E830
To Next Page
Loading...
Need help?
General
