4-1
Chapter 4 Using Options
Chapter 4 Using Options
1. DF HAND FEED KIT
At maximum three sheets of paper can be simultaneously folded together by using the DF HAND FEED KIT.
1-1. Applicable paper and folding mode
Paper to be used
Paper size: A4,B5
Thickness of paper: 52.3 to 81.4g/m
2
/14 to 22 lb
The number of paper to be folded: Maximum three sheets of paper. Fine quality short grain paper
64.0 g/m
2
/16 lb or less, art paper, two sheets of coated paper or less
• Do not use a smaller type of paper than specied. Paper jam may occur inside this machine
by using other type of paper and a trouble may be caused.
• The number of sheets out of the range above cannot be processed, and thinner or thicker
sheets cannot be used. Deformed folding may be performed, and paper jam may occur in this
machine by processing more sheets, or using thinner or thicker sheets than specied, and a
trouble may be caused.
Folding modes
Single fold
Letter fold
Accordion-fold
• Single fold
• Letter fold
• Accordion-fold
When performing letter fold of thick paper,
the folded paper opens at the ejecting
section, and it cannot be conveyed under
the stacker roller, which may result in an
error.
Using A3 or B4 size single folded paper (cross fold)
Cross fold is available only for a single fold
sheet. More than one sheet of single fold
paper cannot be used.
Press the folded section rmly and perform
paper folding operation. The paper feeding
state will be unstable if the folded line is not
folded rmly.
To Next Page
Loading...
Need help?
General
