3-37
Chapter 3 Advanced Operation
8-13. Tone setting
The buzzer (key operational sound on the control panel) or not can be set.
The buzzer sounds with the setting [OFF] when a trouble has occurred.
Default : [ON]
OtherSetting 1/4
Stack Roll Adj
Oper Mode
Test Feed Set
1
Press the menu key to display [Other
Setting].
OtherSetting 3/4
Default setting
Idling
Tone
2
Select [Tone] with the or key.
Tone
ON
3
Press the key.
The [Tone] screen is displayed and [ON] or
[OFF] can be changed at this stage.
4
Select [ON] or [OFF] with the or key.
Tone
OFF
5
Press the key.
The selected item is set.
6
Press the key.
Returns to the [Other Setting].
7
Press the key.
Returns to the top screen.