276
c HELP Mode Function and Operation Procedures
chap.7
Interface Setting
Function setting
2
Interface setting
USB enable/disable
Parallel interface enable (Default) / disable
¡ Operation procedure
2.
Function setting
3.
1.
Enter
“
072
”
by the
NUMERIC
keys and then press the
(PRINT)
key.
Call the HELP mode
“
H-072
”
.
a
To exit the HELP mode
: Turn the power switch OFF.
a
To access another HELP mode
:
Enter the desired mode number
using the numeric keys.
Press the (STOP) key.
The HELP mode selection display will reappear.
Return to the HELP mode.
To Next Page
Loading...
Need help?
General
