4.3.2 Function of SV, AL1, ALH
4.3.2.1 SV: Different digital press needs different IR Temp, different UV coating needs different
Temp setting as well:
HP Indigo Not necessary
Konica Minolta -6500 165
Konica Minolta -1070 175
Konica Minolta -1085 175
Xerox EA Toner 165
Xerox Fuser II Not necessary
Canon CV7000 165
If the image becomes dull, the IR temp may too hot
4.3.2.2 Default AL1 value is 120
to control UV light-up timing. If the temp set too high, it will
over the predefined timing causes E015, UV not Lid.
4.3.2.3 Default ALH value is 30
, AL1 minus ALH defines cooling time. i.e. if the temp cool down
to ( 120-30=90
suction fan and cooling fan will stop automatically means cooling
down cycle complete.
To Next Page
Loading...
Need help?
General