5.12 POWER OFF
5.12.1 Once the cleaning operation has finished, fault indicator stop. Switch the
Main Power to OFF
5.12.2 Set Applicator and Metering Roller to “0010”
IMPORTANT: Please ensure that once all of the UV coating operations have
been completed and the main power is turned to OFF, then the application
and impression control knobs are turned counterclockwise to 0010 to ensure
that the rollers are not in contact with each other. Failure to do so can result in
damage the applicator roller, or causing flat spots.
Power Switch
To Next Page
Loading...
Need help?
General