Duplo ULTRA 200PRO User Manual

27
5. OPERATION PROCEDURE
5.1 POWER UP SEQUENCE
5.1.2 Power-up Feeder and Stacker before UV coater
5.1.1 Fill up the Varnishing into UV Coating Bucket
The Heat Jacket Temp default is 45
℃
, if ambient temperature is lower than 10
℃,
the Temp needs to set higher or wait 20 minutes to let coating get warm
5.1.2 Switch UV Valve to ON
UV Valve
Cleaning
Valve

Duplo ULTRA 200PRO Specifications

General

Brand	Duplo
Model	ULTRA 200PRO
Category	Printer
Language	English