Duplo ULTRA 200PRO - 4.3 Thermometer Operation; 4.3.1 Setting SV, AL1, ALH

21
4.3 THERMOMETER
4.3.1 HOW TO SET SV, AL1 and ALH
4.3.1.1 Hold button for 3 seconds then,
4.3.1.2 SV
:
After 4.3.1.1, press button to move cursor left, button to increase,
and button to decrese. SV default value is 120
℃
4.3.1.3 AL1
:
After 4.3.1.1, then press button once unitl AL1 displayed, AL1 default
value is 120
℃
, If necessary press , and button to set.
4.3.1.4 ALH: After 4.3.1.3, Press button 3 times it will display ALH, default of ALH is
30
℃
4.3.1.5 After ALH, press button 3 times go back to