DECLARATION OF INCORPORATION
PrintFinishing Co. Ltd., located at 625 Sec. II, Wende Road, Hsin-Pu, Hsin-Chu 30500, Taiwan declares that:
◎ The essential requirements of the Machinery Directive are applied to the product mentioned in the
table below and:
◎ The product complies with the provisions defined in the regulations mentioned below and:
◎ The technical documentation is complied in accordance with the Machinery Directive Annex VII part
B:
And under takes:
◎ To transmit relevant information of the product by appropriate method in response to reasoned
request by the national authorities. However that transmission shall be without prejudice to our
intellectual property rights of the product:
And state:
the product is partly completed machinery and must not be put into service until the final machinery
into which it is to be incorporated has been declared in conformity with the provisions of the
Machinery Directive.
Product
Name
Model
Annex I of Machinery
Directive 2006/42/EC
Low Voltage
Directive:2006/95/
EC
RoHs Directive:
Electromagnetic
Compatibility
Directive
2004/108/EC
UL/CUL
Standard File No
Ultra Violet
Coater
Accessories
WB Varnishing
Kit
EN60204-1:2006+A1:
2009
EN-1010-1: 2004
EN-1010-2: 2006
EN60204-1:
2006+A1: 2009
EN50581
EN61000-3-2
EN61000-3-3
EN61000-6-2
EN61000-6-4
CISPR16-3-2
CISPR16-2-1
CISPR16-1-2
IEC61000-4-2
IEC61000-4-3
IEC61000-4-5
IEC61000-4-6
IEC61000-4-8
E305160
Under
certification
by UL Taiwan
In-line
Bridge/Feeder
/Flipper
Keeper of the technical file in the European Community:
Duplo International Inc.
Automated Precision House, Hamm Moor Lane, Addlestone, Surrey KT15 2SD, UK
To Next Page
Loading...
Need help?
General