Duplo ULTRA 200PRO - Page 28

28
5.1.3 Put Circulation Pan in Coating Funnel
5.1.4 Close the metering knob to 0000 and close the applicator knob to 0000
5.1.5 Power-up UV Coater
Waiting 20 Minutes until UV coating is Warm then
5.1.6 Press button to start Warming Up
Indicator Lamp
Metering Roller
Knob and Dial
Applicator Roller
Knob and Dial
Coating
Funnel
Cleaning
Funnel
Main Power
switch